Keep Your Fencing Upright and Secure

Fence Repair and Replacement in Service page for Split Rails, Broken Boards, and Failing Gates

Great Southern Home & Land Services LLC handles fence repair and replacement for rural properties, working farms, and hobby ranches where board fencing, post and rail systems, and gates take regular wear from livestock, weather, and use. You need fencing that holds horses, defines property lines, and withstands wind without constant patching or worry about posts leaning after a storm.

This service covers board fence repairs where rails have split or come loose, post and rail fencing that needs resetting or replacement, gate hinges and latches that no longer close properly, and full sections where rot or impact damage makes rebuilding the better option. The work also includes painting and pressure washing for barns and fences that have weathered gray or developed mildew, restoring appearance and adding years to treated lumber.

Reach out to discuss your fencing condition and schedule an evaluation of the sections that need attention.

Backhoe tractor leveling gravel on a construction site with green grass, trees, and blue sky.

How Fence Repairs Actually Get Done

You start with a walk of the fence line to identify which posts are leaning, which boards have cracked through, and whether gates are sagging or dragging on the ground. Post and rail repairs often require digging out the gravel base around a rotted post, setting a new pressure-treated replacement, and backfilling with compacted stone to prevent future movement.

After the work is finished, your gates swing freely and latch without forcing, boards sit level across the rails without gaps, and posts stand plumb even when a horse leans into the fence line. Painting or pressure washing removes algae buildup and restores the original color, making older fencing look maintained rather than neglected.

Gate reinforcement may involve adding diagonal bracing, replacing hinge pins, or resetting the gate post deeper to handle repeated swings. Board fencing uses kiln-dried lumber when appearance matters and treated pine when durability outweighs aesthetics. This work does not include full perimeter installations or electric fencing systems.

What You Should Know Before Starting

These questions address the common concerns that come up when planning fence repairs or deciding between patching and replacing sections outright.

What causes fence posts to lean after a few years?
Posts lean when the soil around the base shifts from freeze-thaw cycles, water pooling, or insufficient gravel backfill during the original install. Resetting the post with compacted stone and proper depth stops the movement.
How do you decide between repairing and replacing a fence section?
You replace when more than half the boards are cracked or when posts have rotted below ground level. Repairing makes sense when only a few rails need attention and the framework is still solid.
Why does painted fencing need pressure washing first?
Pressure washing removes dirt, mildew, and loose paint so the new coat bonds to clean wood instead of peeling off within a season. Skipping this step leads to early failure of the finish.
What keeps gates from sagging after repair?
Diagonal bracing transfers weight to the hinge side, and setting the gate post at least three feet deep in compacted gravel prevents it from tilting under the gate's swing weight. Without both, sagging returns quickly.
How long does treated lumber last in post and rail fencing?
Pressure-treated posts last fifteen to twenty years when set properly with gravel drainage, while untreated rails may need replacement in eight to ten years depending on exposure and moisture contact.

Great Southern Home & Land Services LLC works with property owners who need fencing that holds up to daily farm use without ongoing repairs. Contact the team to review your fence line and outline what needs fixing or replacing.